Miele Oven & Range Error Code LC

• Oven will not heat or turn on
• Control panel buttons are unresponsive or sluggish
• Display shows LC error message and cooking functions are disabled
• Oven may shut off unexpectedly during cooking
• Heating elements do not respond to temperature settings
• Range burners fail to ignite or respond to controls

• Loose or disconnected internal wiring between control board and heating elements
• Faulty electronic control board or circuit board malfunction
• Defective heating element sensor or thermal sensor failure
• Poor electrical connection at the 240V power supply terminals
• Circuit breaker tripping due to electrical overload or short circuit
• Damaged door latch switch preventing proper oven closure detection
• Software glitch or control panel calibration error
• Moisture or condensation interfering with electrical connections

• Check your home's main circuit breaker panel to ensure the breaker for your oven/range is in the ON position; if tripped, switch it fully OFF then back ON
• Ensure the oven door is completely closed and latches firmly with an audible click
• Review the control panel settings to confirm no child lock, demo mode, or restricted cooking modes are accidentally enabled
• Allow the appliance to cool for 15-20 minutes, then attempt to power it back on
• Verify adequate ventilation space around your oven and range (minimum 3 inches on sides and back); ensure no objects are blocking vents
• Perform a complete reset by turning off the circuit breaker dedicated to your oven/range for 60 seconds, then turn it back ON to clear temporary software errors
• If error persists after reset, do not attempt further repairs and contact a Miele-authorized service technician or call Miele USA customer support