Miele Washing Machine Error Code F29

• Washing machine stops mid-cycle and displays F29 error code
• Machine will not start or respond to button inputs
• Drum does not rotate during wash cycles
• Water inlet or drain functions do not operate
• Display panel may show garbled or frozen information
• Machine beeps continuously or repeatedly
• Unable to access any wash programs or cycles

• Defective main control board (PCB) or circuit board failure
• Loose or corroded electrical connections between control components
• Damaged wiring harness inside the machine
• Faulty touch panel or user interface board
• Power supply module malfunction affecting 120V regulation
• Water level sensor communication failure
• Door latch switch not properly signaling to control board
• Software glitch or corrupted program memory in the control system
• Failed relay or capacitor on the main circuit board

• Turn off the washing machine and unplug it from the electrical outlet for 60 seconds, then plug it back in and attempt to restart
• Check your home's circuit breaker panel to ensure the breaker for the washing machine outlet has not tripped; reset if necessary
• Verify the washer is plugged directly into a grounded outlet and not through an extension cord
• Ensure all water supply valves behind the machine are fully turned on (turn counterclockwise)
• Inspect the drain hose for kinks, twists, or blockages that may prevent proper water drainage
• Remove any clothing from the tub and ensure the door is fully closed and the latch clicks audibly
• Check that you are not overloading the machine beyond its maximum capacity (typically 10-14 lbs depending on model)
• Run a test cycle with no laundry inside to determine if the error persists
• If error continues after these checks, the machine requires professional service from a certified Miele technician