• Verify the dryer's 240V circuit breaker in your electrical panel is in the ON position; if tripped, reset it by switching OFF then back ON
• Unplug the dryer or turn off its dedicated circuit breaker for 60 seconds, then restore power to perform a complete system reset
• Remove and thoroughly clean the lint filter before each load, ensuring no lint debris remains
• Inspect the external dryer vent hood outside your home to confirm it opens freely and is not blocked by lint, debris, or ice
• Check the dryer vent ductwork for visible kinks, crushing, or blockages; straighten any bent sections if accessible
• Ensure the dryer door closes completely and latches securely; listen for the audible click
• Verify adequate clearance around your dryer (minimum 1 inch on sides and back) to allow proper ventilation
• Do not overload the dryer; fill it only three-quarters full to allow hot air circulation
• Confirm the dryer intake vents on the front or sides are clear of lint and not blocked
• Check that your dryer vent duct is not longer than manufacturer recommendations (typically 25 feet maximum)
• Ensure the vent ductwork is rigid or semi-rigid, not flexible plastic, which can sag and trap lint