Miele Washing Machine Error Code F11

• Washing machine fails to fill with water during the wash cycle
• Cycle stops abruptly and displays F11 error code
• Water may trickle slowly into the drum instead of filling normally
• Machine may emit audible clicking or humming sounds from the valve area
• No water appears in the tub despite the fill cycle running
• Error code persists across multiple wash cycles

• Water inlet valve solenoid malfunction or electrical failure
• Clogged water inlet screens or mineral buildup from hard water (common in USA water systems)
• Kinked, pinched, or frozen water supply hose
• Water inlet valve stuck in closed position
• Faulty water level sensor not communicating with control board
• Inadequate water pressure from household supply (below 20 PSI threshold)
• Broken or damaged inlet hose connection points
• Control board malfunction preventing valve actuation at 120V

• Turn off the circuit breaker supplying power to the washing machine for 60 seconds, then turn it back on to reset the control board
• Verify both hot and cold water supply valves behind the machine are fully open (turn counterclockwise)
• Check that water supply hoses are not kinked, bent, or frozen, and feel along their length for any damage
• Inspect the drain hose to ensure it is not clogged or blocked, which can trigger false fill errors
• Ensure the washer door is completely closed and firmly latched with no obstructions
• Reduce the load size to prevent overloading, which can strain inlet valves
• Check that inlet hose connections at both the machine and wall supply are hand-tight and not leaking
• Listen for clicking sounds from the inlet valve area when starting a cycle; this may indicate electrical issues
• If your area has hard water, run a cleaning cycle or consult your manual for descaling procedures